View 16 Channels Remotely with the ZMD-DR-SFN6

1. Download the folder SFN6-Firmware-Update under the Manual tab: http://www.zmodo.com/downloader/index/productView/id/2408/
2. Download the folder ActiveX Reset Script under the Software tab: http://www.zmodo.com/downloader/index/productView/id/2408/
3. Open the folder containing the downloated SFN6-Firmware-Update
4. Right click on the SFN6-Firmware-Update folder and select Extract All
5. Select, Browse, Desktop, Make New Folder
6. Name the folder SFN6-Firmware-Update, select OK
7. Select Extract
8. Open the SFN6-Firmware-Update folder on the desktop
9. Copy the three files onto an empty USB drive
10. Power OFF the ZMD-DR-SFN6
11. Plug the USB drive ino one of the two USB ports on the front panel of the ZMD-DR-SFN6
12. Power ON the ZMD-DR-SFN6
13. The ZMD-DR-SFN6 will update, do NOT unplug the USB drive or power off the DVR
14. Open the folder containing the downloated ActiveX Reset Script
15. Select, Browse, Desktop, Make New Folder
16. Name the folder ActiveX Reset Script, select OK
17. Select Extract
18. Open the ActiveX Reset Script folder on the desktop
19. Right Click on Erase_IE_Control_V0.2 and select Run as administrator
20. When prompted press any key and wait for the scan to finish
21. Open IE, Firefox, or Chrome and log into the DVR

After the firmware update, in order to view from the desktop application again, you will need to uninstall the old version of NetDVR and install the version located here:  https://dl.dropbox.com/u/72446397/NetDvr.msi