This article applies to the following SKU's: DVR-H9004, DVR-H9104V, DVR-H9104UV, DVR-H9008, DVR-H9108V, DVR-H9108UV, DVR-H9006, DVR-H9106UVD-SV, DVR-H9106UVDH, DVR-H9216UVDH, DVR-H9116UVDH. ALL of these DVRs have the default media port of 9000.
- Default Admin Passwords for Zmodo DVR Units
- What DVR Do I Have?
- How Do I Hook Up a Zmodo DVR ? ...
- Interactive Network Tutorial
- Where Can I Find the Software for My DVR? ...
- "IP Access" Setting- Unable to login through Internet Explorer ...
- Date and time sync for wireless IP cameras
- How to Backup a Video Clip from a DVR ...
- How do you install the Zmodo Smart Doorbell - ...
- Wireless camera setup using ZINK with Android
- Wireless camera setup using ZINK with iPhone (iOS)
- I have no image in Zsight!
1. Right-Click on the mouse and select "Main Menu" from the list.
2. In the Main Menu, select the option that says "Network"
3. In the Network section, change the port numbers to whatever you would like. It is recommended to change them to a port number higher than 1024.
4. After the port numbers have been changed, make sure you click "Apply" or "Save" at the bottom of the page.
5. When changes are made to the Network settings on these DVRs, it is necessary to reboot the device before the changes take effect.
6. Log into your router and change the port forwarding rules to use the new ports we just changed.
Note: When you change the web port, the way you access the web interface changes. You will need to use the format of http://IPofDVR:WebPort. Example: http://192.168.1.140:8080
You cannot comment on this entry
- Remote Network Setup
- How to Convert Recorded Video Files for Easy Viewing
- ActiveX Settings for Internet Explorer
- My Camera Images are "Rolling"
- DVR GUI and Software Guide
- How to Connect Cameras & DVR
- How to Change Port Numbers on 9100 and 9000 Series DVR’s
- How to Setup Version 3 DVRs to Run on Safari
- How to Backup Video and Convert to AVI using the Old H9104V, Old H9108V, or H9116UVDH
- Record on Motion Only - H9104V/8V Purchased 2012 or Later
- Software Disc for 9100 Series DVRs Purchased Before 2012
- I have a H9000 or H9100 series DVR, and I need to convert a H.264 video file to AVI.
- Enable Motion Recording on H91XX Series DVRs
- The Mouse and the Buttons on the Front of the DVR Are Not Working
- Setting Motion Recording on the 9000/9100 series DVR's from before 2012
- Setting Continuous Recording on 9000/9100 series DVR's from before 2012
- Video playback on the 9000/9100 series DVR's from before 2012
- Video backup for the 9000/9100 series DVR's from before 2012
- How Do I Format The HDD On A DVR-H9104, H9108, or H9106?
- “HELP! I suddenly can’t see my cameras remotely!”
- Audio setup on analog DVR systems
- Common Troubleshooting with Fort Forwarding Stop Working
. portatil .264 .lvf 12 13GY 16 16 canales 2213 264 3.6 32 32-bit 3rd party 3TB 4 48V 6 700TVL 720p 8 8100 8104UV 8108UV 9000 9004 9006 9008 9100 9114 9118 9124 9126 9128 9216 960H abrir ACC-KB003BG acceder accesar acceso access ACM-Z2213GY activar active ActiveX actualizacion actualizar adapter add Add Device