To enable motion recording on a 91XX series DVR, we must first configure motion detection. After motion detection is enabled, we will change our recording settings to match.
Configure Motion Detection
1. Go to Main Menu
2. Go to Device
3. Go to Motion
4. Enable Motion
5. Choose Sensitivity Level. The higher the number, the more sensitive the camera is.
6. Copy Settings to All channels.
Configure Recordings Settings
1. Go to Main Menu
2. Go to Record
3. Change Record Mode from "Always” to "Schedule”
4. Click "Schedule”
5. Click "Alarm”
6. Highlight all boxes as Red
7. Copy Settings to All Channels.
If you go to the live feed, you should now see the cameras and the letter M on the screens when they detect motion.
Tags: detection, motion, record, setup