Backup Video to DVD on ZMD-DH-SEN6
Please follow these directions in order to backup video from the ZMD-DH-SEN6 to a blank DVD.
Note: The type of DVD you may use will depend upon the burner installed.
-
Insert your blank DVD in to the Sen6. From the DVR right-click on the mouse and select "Main Menu"
-
In the Main Menu, select "System"
-
In the System menu, select "Backup"
-
Select "Backup" again.
-
Choose which channel you want, the start and end time of the time frame you need, and then click "Add"
-
Make sure the amount you are burning is over 100MB or the DVD will not burn.
-
Wait until the Remaining Time is at 0:00 and then wait at least another minute.
-
Reboot the DVR by unplugging it from power.
-
Once the DVR reboots, remove the disc from the DVD drive and take it to your computer.
-
Download and install the program ImgBurn from http://imgburn.com
-
Open ImgBurn and then insert your disc into the computer.
-
Choose "Write Image File to Disc"
-
Select Tools-->Drive-->Close--->Track and wait 30 seconds. The program may report as Not Responding, but just wait the 30 seconds and it should come back.
-
After the program comes back select Tools-->Drive-->Close-->Session and wait 30 seconds. Same as before, the program may report as Not Responding, but just give it some time.
-
After the session is closed, the disc should be readable by any computer.
**This is currently just a work-around until a firmware update is made for the SEN6. Currently the DVR doesn't close the disc properly which is why the additional steps are needed.**
